Oxford ConcreteOxford Concrete

Concrete floor installation in Oxford AL - a slab ready for tile, wood or a coating

Need a new floor for a garage, basement or home? We prep the ground, pour it right and plan around what goes on top.

Smooth concrete floor with control joints fills a brightly lit garage with unfinished insulated walls.
  • Fully licensed and insured.
  • Free quotes on site.
  • Replies within 1 business day.

What does a new concrete floor in Oxford involve?

Concrete floor installation in Oxford means building a new slab for a garage, basement or home floor, starting with the ground under it, so it stays flat and gives tile, wood or a coating a sound base. Most of the waiting comes after the pour, while the slab cures.

Most people call us when they're closing in a garage, finishing a basement or getting ready to build, and the first thing I ask is what's going on top of the new floor. The price mostly moves with the size, how thick the slab needs to be, whether it needs steel in it, how much soft ground we have to dig out and how close we can get a truck. The schedule turns on site prep, the weather on pour day and how long you can stay off the slab while it cures. If your floor comes with a catch, like a cut through an old slab or a layout that isn't standard, that's the kind of job we're known for. Your own number comes from the estimate, after I've walked the site with you.

How do you know it's time for a new concrete floor?

  1. Flooring that lifts or cups

    When wood cups, vinyl bubbles or tile pops loose on a slab floor, moisture coming up through the concrete is often the cause, usually because nothing under the slab stops it. New flooring laid on that same slab tends to end the same way, so it pays to deal with the concrete first.

  2. Cracks with one side higher

    A thin crack that stays flat is usually just the slab shrinking, but a crack where one edge sits higher means the ground underneath has moved. Left alone, the edges chip, it starts catching toes, and the gap lets more water get under the floor.

  3. A dusty, flaking surface

    If the floor sheds dust or the top flakes off, the surface was likely weakened during the pour or the cure. It keeps wearing with every use, and coatings and flooring glue won't hold well to it.

How we handle concrete floor installation

I start with what's going on top, because tile, wood or a coating changes how we handle the moisture barrier, the plastic sheet under the slab that keeps ground moisture out, and how smooth we finish the surface. Then we dig out the soft dirt and pack the subgrade, the ground the slab sits on, and check where water runs so it heads away from the house instead of under the floor. We set the forms, lay the barrier and any steel, pour and finish, then cut control joints, shallow grooves that give the slab a straight line to crack along instead of a random one, and give it time to cure, the slow hardening that gives concrete its strength. If the budget has to give somewhere, I'd rather it come out of the surface than the base, because you can redo a finish later but a base that settles takes the whole floor with it. I'll also tell you up front that some cracking happens and show you how we keep it small.

A new floor often touches the work around it. Where it changes the height at a door, we can build concrete steps to match, and if outdoor work like a concrete pool deck is on your list too, I can look at it on the same visit.

  • Floor going under tile, wood or carpet

    This suits living space, finished basements and additions, where the barrier sits right under the slab and the top is finished flat and smooth so the covering lies down well. We talk through the flooring before we pour, since it decides how we finish the surface.

  • Floor that stays bare or gets a coating

    Garages, shops and storage rooms often keep the concrete as the floor or put a coating on it. We leave a surface a coating can grip and let the slab cure fully before anything goes on it.

  • Floor with steel in it

    Floors that carry cars, equipment or heavy shelving often get rebar, steel bars set inside the slab that help it carry weight and hold any cracks tight. It adds to the cost, so I'll tell you plainly whether your floor needs it.

Get a free price on your new concrete floor

Send the form and we'll reply within one business day to set a time. I'll come walk the site with you, then send a free estimate on site terms, with no pressure and no obligation.

(256) 649-5980
Based in
Oxford, AL 36203
Hours
Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM

What happens after you call about a concrete floor in Oxford?

Here's how a floor job runs from your side, from the first call to walking the finished slab together.

  1. Call or send the form

    Reach us by phone or through the form and we'll get back to you to set up a visit. If you can, have the floor's size, what it's for and any planned covering handy.

  2. Walk the site together

    I come out, walk the site with you and ask a lot of questions about the ground, the water and what's going on top. Then I send an estimate that lists what's in it and what isn't, so there's no guessing about the cost.

  3. Prep, form and pour

    If you go ahead, our crew preps the ground and sets the forms, and I'm on site for the pour. Some things, like a soft spot, only show once the ground is open, so I'll tell you right away if we find one.

  4. Walk the finished floor

    Before we leave, we walk the finished job with you and go over how long to stay off it while it cures. Every job is backed by our satisfaction guarantee.

Why Oxford homeowners call Oxford Concrete for floors

  1. The owner on every job

    I come out to look at every job, and I stay on it with the crew that does the work. The person who asked the questions at your estimate is the one standing there on pour day.

  2. Running this business since 2023

    I learned concrete on a crew years ago, did other work for a while, then came back and started Oxford Concrete in 2023. Coming back with fresh eyes is why I still want to know why one slab holds up and another doesn't, and that's the question I bring to your floor.

  3. Licensed and insured for your floor

    We're fully licensed and insured. Alabama's Home Builders Licensure Board counts building, remodeling or improving a home as home builder work once the job costs more than $10,000, labor and materials included, unless the work falls outside the board's reach, so on a bigger floor it's worth asking any crew where they stand.

I'd rather ask one more question at the estimate than find a surprise on pour day, so tell us about your floor and I'll come look at the ground with you.

What changes a concrete floor job in Oxford

Oxford summers run hot, with typical July highs around 90°F, and heat is hard on fresh concrete because the top can dry out before the slab underneath is ready, which leaves a weak, dusty surface later. Hot-weather guidance says to place and finish concrete outside the hottest part of the day when possible, to finish without sprinkling water on the surface, and to start curing as soon as finishing is done and keep it up for at least three days, with wet burlap and plastic, a curing compound or water. Pour time is a fair thing to ask about, and I'll tell you at the estimate when we'd pour and how we'd cure your slab.

Before work starts, I check with the local building office about your job and tell you plainly what it needs and who handles it. If you have your own question about how Oxford's building codes apply, the city sends those to the city's Building Official at (256) 831-9685. Around here we see a lot of garages being closed in, basements being finished and older slabs that need cutting out first, and we run into the same kinds of floors on jobs in Anniston and Saks.

Questions about concrete floors in Oxford

What does a concrete floor cost near Oxford, AL?

A concrete slab in the Anniston area usually costs about $5 to $11 per square foot, and that's the going rate around here, not our price. Reinforced slabs cost more per square foot than plain pads, and that range leaves out staining or stamping. Your own number comes from the estimate once I've seen the ground.

How long does a new concrete floor take to cure?

Concrete takes a month to fully cure, but a slab should be walkable within 48 hours. To be safe, you may want to wait a week before parking a car on it or moving heavy things in, so plan your move-in around that.

Will my new concrete floor crack?

Probably a little, because today's methods can only reduce cracking in a concrete floor, not eliminate it. What you can compare between crews is how they keep cracks small and where they land, which for us comes down to the base, the joints and the cure described above.

Why does a vapor barrier matter under a concrete floor?

Industry guidance says a vapor barrier, also called a vapor retarder, gives flooring and coatings the most protection when it sits right against the slab. A slab poured right on the barrier needs special care during finishing and curing to keep it from cracking, so ask any crew how they handle that step, and I'll walk you through ours at the estimate.

How thick should a concrete floor slab be for a house or garage?

Most home floor slabs in the Anniston area run four to six inches thick, with garage, basement and foundation slabs at the thicker end. We settle on your thickness after seeing what the floor will carry and what the ground under it is like.

What causes a concrete floor to sink or settle in Calhoun County?

Usually it's water or loose fill, not the soil itself, because Calhoun County's soil mostly rates low for shrinking and swelling. Slabs here still settle from poor drainage, plumbing leaks under the slab, tree roots or dirt that wasn't packed well, which is why the base and the water get so much of my attention.

  • Concrete pool decks

    When a pool is part of the plan, a deck sloped to shed water and finished so it isn't slick underfoot makes the whole area easier to use.

  • Concrete steps construction

    Concrete steps built with even heights and a solid footing make getting in and out of a garage, porch or back door easier on everyone.

Service areas for concrete floor work

Oxford Concrete is based in Oxford, Alabama, and we pour floors across Oxford and many of the cities around it, including Anniston and Jacksonville. The 10 cities below each have their own page, and they aren't the only places we work.

Oxford, AL

Get your new concrete floor priced

The sooner I see the ground, the sooner we know whether there's a catch under it, and that's what shapes your price.